Products Line
Valves & Fittings
Pipes & Fittings
Brand
Products
Balancing valve (Double Regulating Valve)
Bronze (Gunmetal) Body
Kombi-2-plus
Iron Body
V4 Kombi-F Series
Electronic flow meter(for Balancing valve)
VM241 BasicMES
Ball Float Valve
Equilibrium Type (is a traditional design float valve. It fully opens and closes according
901 / 857
854 (1005)
Modulating Type (float valve is designed to maintain a relatively constant level in storage tanks by admitting flow into the tank in direct proportion to the flow out of the tank automatically.)
100-GE-CF9 (50mm size & below)
NGE-100-CF9 (65mm size & above)
Submersible Type (float valve is designed to open fully when the liquid level reaches a preset low point and close drip tight when the level reaches a preset high point. The difference between high and low levels can be adjusted.)
124G-01 (50mm size & below)
624-01 (65mm size & above)
Butterfly Valve
Honeywell
V4 Series
Bray
Fig. 30H / 31H
Fig. 3AH
Fig. 40 - 45
AVK
76/70 series
Fig. 76/71 series
Fig. 813 series
Check Valve
Silent Type (check valve is designed and engineered for silent operation by spring controls the closure of the valve in advance of flow reversal, thereby preventing water hammer and damaging shock associated with valve shut-off )
DZR Brass Body
Fig. JCH90
Iron Body
1400 Series
1800 Series
8800 Series
Fig. 443B
316 Stainless Steel Body
1400 Series
Swing Type (check valve is a traditional design to prevent backflow inside the system. )
Bronze (Gunmetal) Body
Fig. 230
Fig. 236
Iron Body
Fig. 435A
Series 41
316 Stainless Steel Body
Series 614
Non-clogged Type (check valve is a special design for sewage treatment works to provide unrestricted full flow area combined with smooth streamlined contouring allows passage of large solids, minimizing the potential for clogging. "Short 35° Disc str
500 Series
Ball Type (check valve special designed for sewage Treatment works with low pressure loss.)
Series 53
Gate Valve
Bronze(Gunmetal Body)-Screwed/Soldering end
Fig. 207
Fig. 272
Fig. 204
Iron Body-Flanged End
Fig. 415E
Series 02/40
Series 21/30
Series 21/60
316 Stainless Steel Body-Screwed/Flanged end
Series 213 (Flanged End)
Series 213 (Screwed End)
Globe Valve
Bronze (Gunmetal) Body
Fig. 210
Fig. 212
Fig. 213
Iron Body
Fig. 400A
316 Stainless Steel Body
Series 511 (Screwed End)
Strainer
Y Type(strainer is a traditional design for liquid filtration.)
Bronze (Gunmetal) Body
Fig. 380
Iron Body
Fig. 381
316 Stainless Steel Body
Series 812
Bucket Type(strainer is more convenient than Y type strainer for cleaning the screen, which is not necessary to drain the pipeline while cleaning process.)
SU50 Series
AQUA 90-501
Duplex Basket Type (is designed for application that requiring filtration without interruption to the flow during the cleaning process)
OW Series
Auto-Cleaning Type (strainer are disigned specifically to provide efficient filtration, cleaning and draining out the impurities or debris. It can be used in those of high viscosity liquid or the system that requiring continuous filtration without interru
SCF Series
BFS Series
PIPES & FITTINGS
/ LANCEN
Copyright gate way valve & fitting ltd.
by www.bbdco.com